Komatsu 370E
Reliable and productive harvester head with optional debarking capability
Weight (dry weight)
From 1 600 kg (3,530 lbs)
Fell/cut diam. max
700 mm (27.6")
Head opening, max
600 mm (23.6")
Recommended working range
100-280 mm
Specifications
370E
Overview
Dimensions
Width, max
1 950 mm (76.8")
Height incl. rotator
2 080 mm (81.9")
Height to top knife
1 780 mm (70")
Roller opening, max
600 mm (23.6")
Opening front knives
640 mm (25.2")
Opening rear knives
750 mm (29.5")
Specifications
Weight
Dry weight, from 1 600 kg (3,530 lbs)
Feed speed
0–5 m/s (0-16.4 ft/s)
Gross feed force
Feed roller motor dependent. Debarking: 21 kN (4,720 lbf) / 25,7 kN (5,778 lbf). Non debarking: 28,3 kN (6,362 lbf) / 30,8 kN (6,924 lbf)
Feed wheel type
Steel or rubber rollers with anti-slip protection
Delimbing knives, number
6
Delimbing dia., tip-to-tip
500 mm (19.7")
Saw bar
82.5 cm (32.5")
Saw motor
19 cm3/rev (1.16 cu in/rev)
Fell/Cut diam. theor. max
700 mm (27.6")
Max hydraulic flow
Feed roller motor dependent. Debarking: 225 l/min (59.4 gal/min) / 275 l/min (72.7 gal/min). Non debarking: 300 l/min (79.3 gal/min) / 330 l/min (87.2 gal/min)
Max hydraulic pressure
28 MPa (4,061 psi)
Notes
General information
Standard and extra equipment are market-dependent and vary between countries. The specification describes possible equipment, not that which is standard or optional. Stated weights are based on standard equipment. Specifications and designs are subject to change without notice.
