Komatsu XT465L-5

The new XT465L-5 sets high industry standards of excellence for Track Feller Bunchers

Komatsu XT465L-5

Komatsu's new XT465L-5 sets high industry standards for Track Feller Bunchers with the following features:  Gull-wing engine hood service access, Increased lift capacity, Cab relocated to the left side, Rugged new undercarriage, KOMTRAX® telematics system, Powerful fuel-efficient engine and so much more.


Gull-Style Engine Hood

Gull-Style Engine Hood

Gull-wing engine hood folds down providing an elevated service platform.
Hydraulically-actuated with backup manual hand pump.
Robust design provides a secure footing with 500 lbs (227 kg) load capacity.
Offers excellent visibility and access to all engine-related components.
Provides full access to engine oil filter, air filter, fuel filters, coolant, DEF fluid and hydraulic filters.

Relocated Operator's Cab - Increased Track Visibility

Relocated Operator's Cab - Increased Track Visibility

State-of-the-art cab relocated to the left side.
Tracks are now highly visible through the side door and boom side windows
- Larger Door window has an “L-shaped” flat bottom
- Engine/pump compartment is set-back; top 2/3 portion is indented rearward

Rugged New Undercarriage

Rugged New Undercarriage

Rugged new Komatsu undercarriage provides longer service life due to: 
- Heavier 8.5“ track chain links have a thicker bushing strap which is stronger at resisting "twist” 
- Track rollers & idler bushings are made of high-density material 
- New track sliders have a reduced angle providing 30% lower contact 
- Final drives use a new triple labyrinth seal to protect from mud-packing
- Crawler Box improvements include: 
~ Removeable track guards have larger roller side openings to reduce mud packing 
~Additional set of steps has been added to each crawler box

16% Greater Lift Capacity

16% Greater Lift Capacity

Increased lift capacity at full reach vs. XT-3 due to improved boom & arm geometry and larger cylinders.
Provides better balance between boom lift & arm holding capacity.
Broad line of Quadco high speed disc saws available.




XT465-Leveling Side_Front-Dim web
Machine weight (no attachments)

Base machine: 74,516 lbs (33,800 kg)

General information

Operating weight includes standard feller buncher boom, feller buncher 4-bar arm with tool tilt, 1/2 tank of fuel, rated capacity of lubricants, coolant, operator and standard equipment. Cutting attachment not included.


1070 lb-ft (1451 (Nm) @ 1400 rpm


Cummins QSL9 diesel engine


Water-cooled 4-cycle, direct injection


VGT Turbocharger, infinitely adjustable with electronic controls. High pressure fuel injection, in cylinder advanced combustion technology, cooled EGR.

No Of Cylinders

In-line, 6-cylinder


4.49" (114 mm)


5.69" (135 mm)

Piston displacement

543 in/3 (9 liter)


Peak - 331 HP (247 kW) @ 1600 rpm / Rated 300 HP (224 kW) @ 2000 working rmp


Fan Drive Type - Hydraulic

Charge Pump

2x Gear, Max Flow - (95 liter/min) 25 GPM

Implement pump

Variable displacement piston, Max Flow - (324 liter/min) 86 GPM

Swing motor

Fixed Displacement Bent Axis Piston


Independent Radiator/CAC/Hydraulic oil coolers with thermostatically controlled fans

Track drive pump

2x Variable displacement piston, Max Flow - (167 liter/min) 44 GPM

Auxilery pump

Variable displacement piston, Max Flow - (143 liter/min) 38 GPM

Travel motor

Variable displacement piston

Drive method

Hydrostatic, Independent closed loop

Max Tractive Effort

75,799 lbf (34,382 kgf)

Max Travel Speed Hi

3.1 mph (5.0 km/h)

Max Travel Speed Lo

1.4 mph (2.2 km/h)

Parking brake


Steering control

Foot pedals

Service brake


Boom Reach to Pin

Maximum: 21'5" (6,536mm)/ Minimum: 7'8" (2,328 mm)

Cutting Swath

13'9" (4,208mm)

General information

Feller buncher boom and arm, designed for 20-22" high speed disc saw

At ten feet

31,398 lb (14,200 kg)

At fifteen feet

21,519 lb (9,760 kg)

At twenty feet

13,098 lb (5,940 kg)

At Full reach

12,326 lb (5,590 kg)


24V, 100A


24V with master disconnect

Work lights

11 - LED

General information

IQAN-MD4 Digital Control System


7" 18(cm) LED color touch screen

General information

Standard and extra equipment are market-dependent and vary between countries. The specification describes possible equipment, which is either standard or optional. Stated weights are based on standard equipment.


2-cylinder, 4-way heavy duty


25° / 47%


6° / 11%


18° / 32%


Continuous Rotation


Heavy duty, 22-bolt single row bearing

Drive method


Swing speed

0 to 7.0 rpm

Swing torque

58,341 ft-lbs, 79,100 kNm

Swing brake


Parking brake



HD boxed frame structure with flat bottom and storage trunk

Track frame

Box-section, bolted

Track type

grease sealed

Track pitch

8.5", 216 mm

No of shoe links

47 per side


9 per side

General information

Quadco 20-22" high speed disc saw. Quadco 24" high speed disc saw. Check availability through your local dealer.


Final Drives: Komatsu with spring-applied oil released track brakes. Hydraulic track adjuster. Track Chain: Grease sealed Komatsu 8.5" pitch chain. 47 links per side. Track drive: closed loop. Track motors: 2 speed VDPP auto shift with variable speed.

Guards and covers

Muffler with blanket. Rubber debris skirt.

Engine and related items

Cummins QSL9 9-liter. Air cleaner-dry type with air intake pre-cleaner. Auto-idle shutdown system. Engine compartment service light. Engine interface monitoring system. Cooling: engine-temperature-sensing auto-reversing fan. Charge air cooler

Electrical system

Alternator: 100 ampere, 24V. Batteries: 2x 12V, 950 AH. Electrical system master disconnect switch. Electrical joystick/foot pedal controls.


Attachment 1x VDPP, 53 GPM (200 liter/min), 1x VDPP, 86 GPM (324 liter/min), 1x VDPP, 38 GPM (143 liter/min). Fan 2x gear, Max Flow 11 GPM (44 liter/min) each. Charge: 1x Gear, 25 GPM (95 liter/min).


8'4" (2540 mm) gauge, 10'4" (3140 mm) overall width with storage trunk


Load sensing hydraulic system. Hydraulic tank oil refill pump (24V). Hydraulic tank vacuum pump. Hydraulic oil cooler. Temperature-sensing auto-reversing fan.

Operator environment

ROPS/OPS/FOPS/TOPS/FOG/WCB/Oregon OSHA certified forestry cab. Automatic air conditioner: Heater & defroster with pressurization and 6 adjustable vents. 12V power outlets (2). Adjustable cellphone holder. Coat hook: magnetic and movable. Radio-AM/FM Weather Band stereo with iPod/MP3 input jack. Seat, adjustable high back suspension. Seat belt, 3" retractable.

Other standard equipment

Continuous swing rotation. Control handles, sure grip. Emergency escapes, 3 (front window, side door and roof hatch). Fire extinguisher, 10 lb. hand held. Fire suppression system, automatic liquid chemical.


Feller buncher, 13'0" (3960 mm) straight with tree deflector


Feller buncher 14'10" (4530 mm)


Disc Saw, bar saw, intermittent disc saw, combination disc/bar saw.

Track shoe

28" (700 mm) Single Grouser

Other optional equipment

Carrier rollers, oil cooler, pump drive. heater, fuel-fired jacket water and hydraulic oil pre-heater. Side view monitoring system (1 camera) Uptime spare parts kits, base machine, engine filters